Full system pressure test
We isolate the supply and drain sides with pressure testing gauges to confirm which system is losing water. This step alone rules out half the possible causes before we bring in the acoustic gear.
Licensed
Licensed & Bonded
Fully Insured
Insured & Bonded
24/7 Emergency
Same-Day Response
Warranty Backed
15+ Years Trusted in Brea
What our Pipe Leak Detection in Brea includes
Every detection visit covers the full investigation, not just a quick listen. Here is what is included in the standard flat rate, and what we handle as a separate repair once you approve it.
Acoustic and thermal scan
Acoustic listening devices trace the leak sound along the pipe run, and a thermal imaging camera confirms the location by showing temperature differences. Two methods, one confirmed location.
Leak location marked on site
We mark the spot with tape and show you the thermal image or acoustic reading. You see the evidence before we quote any repair, so there is no guessing about what we found.
Written findings summary
You get a short written report of what failed, the pipe material, the leak location and our repair recommendation. Useful for insurance claims and for your own records at resale.
Same-day repair quote
If you want us to fix it, we quote the repair on the spot. Most pipe leak repairs in Brea are completed the same visit, and we credit the detection fee toward the repair when you approve it that day.
What Pipe Leak Detection in Brea actually involves
Pipe Leak Detection in Brea is the process of locating a hidden water or gas leak inside walls, under slabs, in irrigation lines or beneath the yard without tearing your home apart. We start by isolating the system, then use acoustic listening devices to hear the leak through concrete and drywall. A thermal imaging camera shows temperature differences where water is pooling, and pressure testing gauges confirm whether the loss is on the supply side or the drain side. Once we know the pipe material, copper, PEX or PVC, we choose the right repair method.
Most Brea calls start the same way: a water bill that doubled, a warm spot on the floor, or a meter that keeps spinning with every fixture off. Homes built in the 1960s and 70s around Downtown Brea and Brea Hills often have original copper pipes that develop pinhole leaks, while newer builds in La Floresta and Lambert Ranch run PEX that can fail at fittings. If you have been searching pipe leak detection near me Brea, we can usually be on site the same day.
How our pipe leak detection process works
Every job follows the same five steps, whether it is a single-family home in Country Hills or a commercial building in Central Brea. Here is exactly what you can expect from the call to the final test.
01
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
02
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
03
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
04
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Tools and methods we use
Tools & Equipment
Acoustic listening devices
Picks up the sound of water escaping a pressurized pipe through concrete, drywall and soil. This is our primary tool for slab and underground leaks.
FLIR thermal imaging cameras
Shows temperature differences caused by escaping water behind walls and under floors. Confirms a leak location without opening anything up.
RIDGID pipe inspection cameras
Lets us see inside drain and sewer lines to find cracks, root intrusion and failed joints that pressure testing alone cannot pinpoint.
Sewerin tracer gas detectors
Used for gas line leaks and for water lines where acoustic readings are ambiguous. Tracer gas follows the leak path to the exact exit point.
Pressure testing gauges
Isolates the supply side from the drain side and confirms whether a repair holds. Every job ends with a 30-minute pressure test.
Moisture meters and infrared thermometers
Maps the spread of moisture around a suspected leak so we know how far the water has traveled and what else needs to be checked.
Methods & Standards
Two-method confirmation
We never mark a leak location based on one tool alone. Acoustic findings are confirmed with thermal imaging or tracer gas before we quote a repair. This is why our access cuts are small and our repairs hold.
Uniform Plumbing Code compliance
Every repair follows the Uniform Plumbing Code and California Building Standards Code. Copper, PEX and PVC repairs use the correct fittings, sealant and solder for the pipe type, and we pull permits when the scope requires it.
Pressure-test verification
After the repair, we re-pressurize the line and hold it for 30 minutes. If the gauge moves, we keep working. You do not get a closed-up wall until the line passes.
Material-specific repair
Copper gets soldered or pressed fittings, PEX gets the correct expansion or crimp rings, PVC gets solvent-welded joints. Using the wrong method for the material is the number one cause of repeat leaks.
When to call for pipe leak detection
01
You get a water bill that is $100 or more above normal with no change in usage.
What we do: We run a full system isolation with pressure testing gauges, then scan the supply and drain lines with acoustic and thermal gear. Most supply leaks are located within 90 minutes.
→ You get a confirmed leak location and a same-day repair quote. The next bill reflects the fix.
02
A section of floor feels warm, or you hear water running when every fixture is off.
What we do: That combination points to a slab leak. We use acoustic listening devices along the slab and confirm with a thermal imaging camera before marking the repair point.
→ One small access cut instead of a full floor replacement, and the line is pressure-tested before we close it.
03
You are buying or selling a Brea home and the inspection flagged possible moisture.
What we do: We run a full detection scan on the supply, drain and irrigation systems and document the findings in writing. If there is no leak, you get that in writing too.
→ A clean report you can hand to the buyer, seller or agent, with no ambiguity about what was checked.
04
A pipe bursts at 2 a.m. and water is spreading across the floor.
What we do: We run 24/7 emergency pipe leak detection Brea CA calls. Shut off the main, call us, and we will locate the break and stop the water the same visit.
→ Water stopped, break located, repair completed, and the line tested before we leave.
How Pipe Leak Detection in Brea runs locally
Brea sits on clay-heavy soil that expands and contracts with the seasons, and that movement is hard on buried pipes. Homes built in the 1960s and 70s around Downtown Brea and Brea Hills often still have original copper, which develops pinhole leaks as the pipe wall thins. Newer developments like La Floresta and Lambert Ranch run PEX, and when those fail it is usually at a fitting or a crimp ring rather than mid-run. We also see a spike in irrigation and water main leaks during the dry months from June through October, when Brea's clay soil pulls away from buried lines and shifts them. If you are searching for pipe leak detection inside walls Brea CA, we use thermal imaging to confirm the location before opening anything. Every repair we make follows the Uniform Plumbing Code and California Building Standards Code, and we pressure-test the line before closing it up. Whether you are in ZIP 92821, 92823 or 92822, we can usually be on site the same day.
Neighborhoods We Serve
-
Downtown Brea
Older housing stock with original copper supply lines. Pinhole leaks in walls and under slabs are the most common call we get here.
-
La Floresta
Newer PEX systems. When leaks happen, they are usually at fittings or where the line passes through a slab penetration.
-
Brea Hills
Elevated lots with longer underground runs. Water main and irrigation leaks show up here more often than indoor leaks.
-
Country Hills
Mix of tract homes from the 1970s and 80s. We see a lot of slab leaks and aging water heater supply lines in this area.
-
Central Brea
Commercial and mixed-use buildings. We schedule detection around business hours so operations are not interrupted.
Local Conditions We Plan For
-
Clay soil expansion and contraction
Brea's clay soil shifts with moisture changes, which stresses buried pipes and can crack water mains and irrigation lines over time.
-
Dry summer months from June to October
Low soil moisture pulls away from buried lines and increases the chance of shifts and breaks. This is our busiest season for underground leak calls.
-
Aging copper in 1960s and 70s housing
Original copper thins over decades and develops pinhole leaks. We see this most in Downtown Brea and Brea Hills.
-
Slab-on-grade construction
Many Brea homes are built on slab, which means a supply-line leak under the floor is invisible until it shows as a warm spot or a high bill.
Pinhole leak in Downtown Brea copper
Problems our Brea pipe leak detection solves
Most Brea customers call us because something is wrong and they cannot see where. These are the four problems we run into most often, and what happens if they are left alone.
Problem
Water bill doubled with no visible leak
A hidden supply-line leak can waste 10,000 gallons a month and quietly rot framing, subfloor and drywall behind the walls.
Our Fix
We isolate the system with pressure testing gauges, then use acoustic listening devices to trace the loss to a single point. Most hidden leaks are found and repaired within one visit.
Problem
Warm spot or damp carpet on a slab floor
A slab leak under Brea's clay soil can shift the foundation within months and cost five figures in structural repair if ignored.
Our Fix
We use thermal imaging cameras and acoustic gear to locate the break under the concrete, then repair the line through a small access cut instead of breaking out the whole floor.
Problem
Musty smell under cabinets or in a closet
Slow drain or supply leaks behind cabinets feed mold growth and can ruin cabinet bases, vanities and flooring before you notice the water.
Our Fix
We check supply lines, shutoff valves and drain connections with moisture meters and a pipe inspection camera, then repair the failed joint and dry-test the area.
Problem
Green patch in the yard or sinking soil
An irrigation or water main leak outside the house wastes water, erodes soil and can undermine a driveway or patio over time.
Our Fix
We pressure-test the zones, then use acoustic and tracer gas methods to locate the underground break. One hole, one repair, no exploratory digging across the yard.
Why Brea homeowners call us first
A hidden leak costs you money every hour it runs. These are the four outcomes our Brea customers care about most, and the reasons they keep our number saved.
-
Stop the water bill bleed
A pinhole leak the width of a pencil lead can waste 10,000 gallons a month. We locate it, repair it and re-test the line the same visit, so your next Brea water bill reflects the fix, not the leak.
-
No unnecessary demolition
Acoustic listening devices and thermal imaging cameras let us mark the leak within inches before anyone picks up a saw. That means one small access cut instead of tearing out an entire kitchen floor or bathroom wall.
-
Protect your foundation
Slab leaks and foundation leaks in Brea's clay-heavy soil can shift a home's footprint within months. Catching the leak early with electronic leak detection equipment keeps the repair to plumbing instead of structural work.
-
Same-day, 24/7 response
Water does not wait for business hours. We run 24/7 pipe leak repair in Brea California, including emergency pipe leak detection Brea CA calls at 2 a.m. when a supply line lets go under a sink.
Licensed, certified and reviewed
Licensed & Certified
- California State Plumbing License — issued by California Contractors State License Board
- C-36 Plumbing Contractor License — issued by California Contractors State License Board
- Backflow Prevention Certification — issued by Orange County Health Care Agency
- OSHA Safety Certification — issued by Occupational Safety and Health Administration
Verified Reviews
Google ★★★★★4.9
Found a slab leak in our Brea home that two other plumbers missed. Used acoustic gear and a thermal camera, marked it within inches, and repaired it the same day. Water bill is back to normal. Worth every dollar.
Yelp ★★★★★4.8
Called at 11 p.m. with water coming out from under the kitchen cabinet. They were here in under an hour, found the failed supply line, and had it repaired before 1 a.m. Professional and no upsell.
BBB ★★★★★4.9
We use them for all three of our Brea commercial properties. They document everything, work around our hours, and the repairs hold. That is rare in this trade.
Google ★★★★★5.0
Honest pricing and they showed me the thermal image before quoting anything. Turned out to be a small PEX fitting, not the whole repipe another company tried to sell me. Will use again.
What Brea customers say
Real experiences from customers who chose our Pipe Leak Detection services.
“Our water bill jumped $140 in one month and we could not find anything. Brea Leak Detection Pros came out the same day, used a thermal camera on the kitchen wall and found a pinhole leak in the copper behind the cabinets. They cut one small access panel, repaired it and pressure-tested the line. Bill went back to normal the next cycle.”
M
Marcus T.
Homeowner, Downtown Brea
“We had a warm spot on the bathroom floor for weeks and two other plumbers wanted to jackhammer the whole slab. These guys used acoustic gear and marked the leak within six inches. Turned out to be one failed PEX fitting. Repair was done in an afternoon and they cleaned up better than they found it.”
S
Sandra K.
Homeowner, La Floresta
“I manage three commercial buildings in Brea and use them for every leak call. They found an underground irrigation break at one property that had been soaking the parking lot for months. Located it acoustically, dug one hole, fixed it. No guesswork, no repeat visits. That is why I keep their number.”
D
Dave R.
Property Manager, Central Brea
Frequently Asked Questions
Real answers to the questions we hear most often from local homeowners and property managers.
How much does pipe leak detection cost in Brea CA?
Most residential detection jobs in Brea run $180 to $450, and the visit takes two to four hours. Slab leaks and underground lines sit at the higher end because they need more equipment time. If we find the leak and you approve the repair the same day, we credit the detection fee toward the repair cost. Emergency calls after hours carry a higher rate.
How do I find a pipe leak in Brea California?
Start by shutting every fixture off and watching your water meter. If the dial still moves, you have a supply-line leak. Then check for warm spots on the floor, musty smells under cabinets and unexplained green patches in the yard. If none of that narrows it down, call us. Acoustic listening devices and thermal imaging cameras find leaks that visual inspection misses.
Who repairs pipe leaks in Brea CA?
We do, and we handle both the detection and the repair in one visit. Brea Leak Detection Pros holds a California State Plumbing License and a C-36 Plumbing Contractor License, so the same crew that finds the leak fixes it and pressure-tests the line before leaving. You do not need to coordinate a separate plumber.
Can pipe leaks be fixed without replacing pipes in Brea CA?
Yes, in many cases. A pinhole leak in a copper run can be cut out and a new section soldered in, which is a localized repair, not a whole-house repipe. PEX and PVC fittings can often be replaced at the joint. We only recommend a repipe when the pipe wall has thinned across a long run or we find three or more leaks on the same line.
Related Services
Slab Leak Detection
Slab leaks are the most common reason Brea homeowners call us for pipe leak detection. We use acoustic listening devices and thermal imaging to find the break under the concrete, then repair the line with minimal access cuts.
View Slab Leak DetectionPool Leak Detection
If your Brea pool is losing more than a quarter inch of water a day, the leak may be in the plumbing, not the shell. We pressure-test pool lines and use leak detection dye to isolate the failure point.
View Pool Leak DetectionPlumbing Leak Detection
Whole-system plumbing leak detection covers supply lines, drains and fixtures in one visit. It is the right call when you know you have a leak but cannot tell which system is losing water.
View Plumbing Leak DetectionGas Leak Detection
Gas leaks need immediate attention. We use tracer gas detectors and pressure testing gauges to locate the leak on gas lines, then make the repair to Uniform Plumbing Code standards.
View Gas Leak DetectionAcoustic Leak Detection
Acoustic listening devices pick up the sound of water escaping a pipe through concrete, drywall and soil. It is our primary tool for slab leaks and underground lines where nothing is visible.
View Acoustic Leak DetectionThermal Imaging Leak Detection
FLIR and Fluke thermal imaging cameras show temperature differences caused by escaping water. This is how we confirm a leak behind a wall without opening it up first.
View Thermal Imaging Leak DetectionContact Brea Leak Detection Pros
Call (657) 681-3703 any time, day or night. A live dispatcher answers, asks a few questions about what you are seeing or smelling, and gets a tech headed your way. Most Brea calls get a same-day window, and emergency calls roll 24/7. You can also email leakdetectionbrea@gmail.com and we will respond within one business hour during regular hours.
Brea Leak Detection Pros
-
Phone
(657) 681-3703 -
Address
200 Fig Ave, Brea, CA 92821, USA
-
Hours
Monday–Sunday: 7 Days a Week
Open 24 Hours
Same-Day Service
24/7 Emergency Available